Home network

WAN IP Address: What It Is and Why It Differs From Your Public IP

WAN IP address explained: the address your ISP gives your router's Internet port, how to find it, and why CGNAT or double NAT makes it differ from public IP.

In this guide

A WAN IP address is the address assigned to your router's Internet (WAN) port by your ISP, usually through DHCP or PPPoE. It is normally the same as your public IP. When it differs, your ISP is using carrier-grade NAT (100.64.0.0/10) or a second router is translating addresses in front of yours.

Test it now

Cloudflare edge
IP websites see216.73.216.115
LocationColumbus, United States
Internet providerAnthropic, PBC

Read at the Cloudflare edge from this request. The homepage adds your provider, network type and the VPN, DNS and WebRTC checks.

Show details

What is the WAN IP?

The WAN IP is the address configured on the port of your router that faces your ISP, labeled WAN or Internet on the case. It is the source address of every packet your router sends toward the internet, and every phone, laptop, and console in the house shares it, because the router rewrites their private source addresses to the WAN IP as traffic leaves.

Your ISP delivers the address in one of three ways:

  1. DHCP. The router asks the ISP's DHCP server for an address and receives it as a lease, which RFC 2131 defines as "the period over which a network address is allocated to a client."
  2. PPPoE. The router opens a PPP session over the Ethernet link, logging in with a username and password; RFC 2516 defines the method for "broadband remote access technologies that provide a bridged Ethernet topology." The address arrives inside that session and exists only while the session is up.
  3. Static. The ISP fixes the address to your account and you type it into the router. ISPs commonly charge extra for it; Aussie Broadband, for example, documents static addresses as a paid add-on for residential customers.

WAN IP vs LAN IP vs public IP vs private IP

These four terms describe two sides of one box: a LAN side with private addresses and a WAN side that should carry the address the rest of the internet sees. "Public IP," "external IP," and "Internet IP" all mean that outside-facing address.

TermWhere it livesTypical valuesWho assigns itSeen by websites?
WAN IPYour router's Internet portA public address; 100.64.x.x under CGNAT; 192.168.x.x or 10.x.x.x behind a second routerISP via DHCP, PPPoE, or static; or the upstream routerOnly when it is the public address
LAN IP (router)Your router's inside interface, the default gateway192.168.0.1, 192.168.1.1, 10.0.0.1Router firmware default, changeable by youNo
Private IP (device)Each device on your network10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 (RFC 1918)Your router's DHCP serverNo
Public IPThe address that reaches the internetAny globally routable addressYour ISP, or a VPN or proxy if you use oneYes

RFC 1918 reserves the three private blocks and states that "packets with private source or destination addresses should not be forwarded" across links between networks, which is why a private address can be reused in every home and why a router must translate it before anything leaves. The guide to public vs private IP addresses covers the ranges; this page concentrates on the WAN side and the cases where the WAN IP and the public IP stop being the same number.

How do I find my WAN IP address?

The WAN IP is only shown inside the router's administration page. Find your router's address first (the find your router's IP address guide covers every platform), sign in, then open the status page. The three paths below come from each vendor's own documentation; none of the three articles names a firmware version, so check the menu names against your model's manual if they differ:

  1. NETGEAR Nighthawk (WiFi 5 models such as the R6700, R7000 and R8000). Open routerlogin.net, sign in, click the ADVANCED tab, and in the Internet Port pane click Connection Status. NETGEAR's article describes the IP Address field as "the IP address that is assigned to the router," shown with the gateway, DNS server, and lease times.
  2. TP-Link Wi-Fi routers (web interface). Sign in and go to Advanced > Status. TP-Link's troubleshooting FAQ, updated April 20, 2026, reads the Internet IP address from this screen and explains that 0.0.0.0 "means the router has not received a valid address from the modem."
  3. ASUS wireless routers. Sign in at asusrouter.com or the router's LAN IP and look at Network Map. ASUS's FAQ, updated July 22, 2024, states that "Connected and WAN IP is displayed when the network connection is successful."

Now compare the number with your public IP. The CheckMyIP homepage shows the IPv4 and IPv6 addresses your browser presents to the internet, the ISP and ASN they belong to, and the connection type. If the router's WAN IP and the public IP match, your router holds the public address and the next section does not apply to you. If they differ, read on. The local IP tool explains what each private range means, including 100.64.x.x, and the IP lookup tool accepts any address, so you can paste the WAN IP from the router page and see its registry record, ASN, and connection type.

Is WAN IP the same as external IP? Why your WAN IP may not match your public IP

For a router connected directly to the ISP and given a public address, WAN IP and external IP are the same thing. The two numbers diverge in three documented situations.

Carrier-grade NAT. If the WAN IP is between 100.64.0.0 and 100.127.255.255, your ISP is translating your traffic a second time inside its own network. RFC 6598 reserves this block as Shared Address Space for providers "to number the interfaces that connect CGN devices to Customer Premises Equipment (CPE)" and requires that packets carrying these addresses "MUST NOT be forwarded across Service Provider boundaries," so nothing on the internet can reach that address directly. Aussie Broadband's CGNAT documentation puts the customer-side effect plainly: "your modem or router will be assigned a private IP address instead of a unique public IP address," and the way off CGNAT on that network is a static IP that costs extra for residential customers. The CGNAT guide explains how to confirm it and what it breaks.

Double NAT. If the WAN IP is in a private range such as 192.168.x.x or 10.x.x.x, another router is in front of yours and handing out addresses to it, usually an ISP-supplied modem and router combination. Traffic is then translated twice on the way out, and inbound connections have to be forwarded through both boxes. Some ISP gateways offer a bridge or modem-only mode so that only one device performs NAT; whether yours does, and what the setting is called, depends on the ISP and model.

A VPN on the router. When a router runs a VPN client, its WAN IP is still the ISP address, but every website sees the VPN server's address instead. The homepage check shows which one the internet sees, and the IP lookup tool reports whether that address is on a published VPN or hosting range.

A fourth case only looks like a mismatch: websites that support IPv6 see your device's IPv6 address, which never matches the IPv4 WAN IP. The IPv6 test shows whether your connection has working IPv6 and whether the IPv4 and IPv6 addresses come from the same network.

Static vs dynamic WAN IP: does it change, and when

Most home WAN IPs are dynamic, which means they are leased rather than owned, and they change less often than people expect. RFC 2131 says a client "MAY choose to renew or extend its lease prior to T1," the first renewal timer, and that the allocation mechanism "attempts to return the same network address each time the client requests an address." A router that stays online renews in place and tends to keep its address until the lease is allowed to expire. The usual triggers for a change are a long power-off and a router swap, because the lease is tied to the hardware address that asked for it; TP-Link's FAQ suggests cloning the previous computer's MAC address when a new router sits on 0.0.0.0 for exactly this reason.

PPPoE connections receive an address when the session comes up, so a reconnect can bring a new one. A static WAN IP never changes while you pay for it, and leaving CGNAT for a static address changes your IP once: Aussie Broadband notes that "Opting out of CGNAT will result in your unique public IP address changing." The static vs dynamic IP guide explains how to tell which you have.

IPv6 on the WAN side: prefix delegation and why there is no NAT

IPv6 changes the model. Instead of one WAN address shared by the whole house, your ISP delegates an entire prefix to the router, and every device gets its own globally reachable address from it. RFC 7084, the baseline for IPv6 home routers, requires that the router "MUST act as a requesting router for the purposes of DHCPv6 prefix delegation," that it "MUST assign a separate /64 from its delegated prefix(es)" to each LAN, and that it "MUST create a global IPv6 address(es) from its delegated prefix(es)." RFC 9915, the DHCPv6 specification published in January 2026 to replace RFC 8415, calls prefix delegation "appropriate for use by an ISP to delegate a prefix to a subscriber."

Because each device holds a global address, there is no translation step and no single "WAN IP" that stands in for everyone. That also means a connection stuck behind IPv4 CGNAT can still accept inbound IPv6 connections, which is one of the workarounds the CGNAT guide describes. The IPv6 test tells you whether your ISP has delegated a prefix at all.

Is my WAN IP exposed? Firewall, UPnP and an open-port check

A public WAN IP is reachable by anyone on the internet, which is the point of having one. What reaches your devices is decided by the router: it drops unsolicited inbound connections and lets through only what you forward or what UPnP opens. NETGEAR's UPnP documentation describes the feature as letting devices "automatically control router resources" such as port forwarding, warns that "A worm or malware program can use UPnP to compromise the security of your LAN," and recommends manual port forwarding instead.

To see what is actually open from the outside, use the port checker, which tests whether a TCP port on your public IP is reachable from the internet. Two readings need care. A closed port under CGNAT is closed because the ISP's translation never forwards it, not because your firewall did its job, and the same applies behind double NAT until both routers forward the port. If your public IP is a VPN server's address, the test is probing the VPN provider, not your home.

LAN and WAN explained: what is the difference between WAN and LAN

A LAN, or local area network, is the network you own: the router's Wi-Fi and Ethernet ports and every device connected to them. It uses private addresses, and the router's LAN IP is the default gateway those devices send everything to when the destination is outside the LAN. A WAN, or wide area network, spans beyond a single site; in home use it means the link from your router to the ISP and, through it, the internet. The router is the boundary, with a LAN IP on the inside and a WAN IP on the outside, translating between them.

"Internal vs external IP address" is the same split seen from a device: the internal address is the private one your laptop holds on the LAN, and the external address is the one websites log. Internal addresses are chosen by your router and can be reused in any other home; external addresses are globally unique and belong to your ISP.

Sources

Questions

Is 192.168.1.1 a gateway?

Usually. 192.168.1.1 sits in the 192.168.0.0/16 private range from RFC 1918, and many router brands use it as the LAN-side address that devices reach as their default gateway. It is never a WAN IP on the public internet. Confirm by reading the default gateway on any connected device.

What is LAN IP and WAN IP?

A router has two sides. Its LAN IP (for example 192.168.1.1) is the private address your devices use as the gateway. Its WAN IP is the address on the Internet port, assigned by the ISP. Devices behind the router share the WAN IP whenever they reach the internet.

Can two devices have the same IP address?

Not on the same network. Two devices with one address on a LAN cause an IP conflict, and ASUS routers report "IP conflict detected" when it happens. Across different networks it is normal. Every home can use 192.168.1.1 because private ranges are reused everywhere and never routed between networks.